Handlekurven er tom
Handlekurven er tom
Red Dragon® 3 Speedy pump 150 Watt / 18,0m³
with AKB anti-lime-bypass and 10V connection
Technical data Red Dragon® 3 Speedy pump 150 Watt 18,0 m³:
150 Watt/h 5,75 mtr. pressure height
speed adjustable brushless DC pump
Watt-Display at the controller /// in 2Watt steps adjustable
intake side 50 mm - pressure side 40 mm
operating voltage: 230 Volt 50 Hz (also in 110V/60Hz available)
pump and controller with a removeable Hirschmann-plug-connection
Protection class pump: IP 68 control unit: IP 66
Weight pump: 3,5 kg
Weight controller: 1,2kg
Height of intake side: center 70 mm
Dimension pump: ~ 130 mm wide / 290 mm length / 210 mm height
Dimension control unit: ~ 190 mm wide / 168 mm length (250 mm with connection cable) / 84 mm height
Data_sheet_and_spare_parts.pdf Operating_and_maintenance_manual.pdf
/////////////////////////////////////////////////////////////////////////////////////
Extensive function integrated in the controller:
1. Food timer
By selecting the menu entry, the pump is reduced to minimum output for a pre-defined period of 1-30 minutes or switched off completely.
2. Manual
This function enables manual selection of the pump output. The value can be set in increments of 2W (10W). By holding the UP or DOWN key, the highest or lowest possible value is activated (150W/20W).
3. Interval
This function enables changing the pump output in time intervals.
4. Remote 10V
This function activates control via the 10V input.
5. Remote LAN
This function activates the control via the future LAN adapter.
Change functions:
6. Changing food timer
By selecting this change function, the time of the food timer can be pre-set at a range of one minute to 30 minutes (UP/DOWN arrow keys).
7. Changing interval
By selecting this change function, you can enter the interval time.
8. Change clock settings
By selecting this change function, you can set the clock.
9. Change language
By selecting this change function, you can set the menu language. (german/english).
/////////////////////////////////////////////////////////////////////////////////////
The control/connection of Aquarium computer possible!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
No additional controller needed.
